Gyru-Star screening buckets are the best way to maximise the capabilities of your excavators, loaders and skid steers. However, to enable you to get the most from your Gyru-Star screening bucket, we offer a range of high-quality accessories and add-ons.
Fragment Kits
Gyru-Star screening buckets are available in four different fragment sizes: 10, 15, 20 and 40mm (nominal). If you are unsure which fragment size is right for you, please contact your nearest Gyru-Star dealer, or get in touch with our team here.
Comb Kits
To prevent oversize material from escaping over the top rotor of the bucket, and reduce the fragment size, steel combs can be fitted to every Gyru-Star screening bucket on offer.
These single bolt to the shell, just above the top rotor, with fingers extended in between the poly-stars. Please note that these are not currently available with the 40mm fragment kit.
Flow Control Valves
For carriers without the option to control the hydraulic flow, Gyru-Star screening buckets can be fitted with pressure-compensated flow control valves. Mounted to the exterior of the screening bucket, these enable to operator to manually set the hydraulic flow rate.
These are a standard feature on all of our skid steer specific models (SL range) but can be fitted to any model in the range.
Cross-Over Kits
If the position of the auxiliary hydraulic hoses on your carrier do not match the position of those on the Gyru-Star screening bucket, then a cross over kit can be fitted. This ensures the hoses are kept out of the way, preventing any accidental damage.
Stone Guard Extensions
If you are screening material which contains a lot of stones or rocks, then you may benefit from having our extended stone guards fitted to your screening bucket. The extended stone guards deflect any stray debris, ensuring the material goes exactly where it should and improving operator safety.
Kustom Konnect Head Plates and Interfaces
Through our Kustom Konnect brand, we offer a full range of head plates and interfaces for all kinds of carriers. In additon to standard fixed and sliding pin had plates, we also offer interchangeable pin head plates, dual excavator-loader interfaces and custom-made products.
No matter what carrier you have, we can supply a high-quality custom-made head plate or interface to suit. These can be supplied with any Gyru-Star screening bucket.
コメント